WXGA 0.8” M108 FLCoS Display
The WXGA M108 Display (13.62µm) is an FLCoS with a resolution of 1280 x 768. This compact, high-performance microdisplay is ideally suited for high-performance monocular, biocular, and binocular imaging applications.
Specifications
Resolution Standard | WXGA |
---|---|
Active Area Diagonal | 0.8” |
Resolution | 1280 x 768 |
Pixel Pitch | 13.62 µm |
Pixel Form Factor | Square |
Fill Factor | >96% |
Light Modulation | Binary Amplitude / Binary Phase |
Wavelength Range | 430-700 nm |
Operational Temperature Range | -10 to +50° C |
Storage Temperature Range | -30 to +70° C |
Integrated Temperature Sensor | Y |
Frame & Mask | Y |
Compatible Interfaces | R3, R5 (video IF), R12 (memory IF) |
Max Frame Rate (24 bit video IF) | 120 Hz |
Max Binary Frame Rate (memory IF) | 3.2 kHz |
With R3 Interface
Optional dither algorithms to increase greyscale resolution |
---|
Fast switching liquid crystal with typical 40 μsec switching |
Refresh rate up to 85Hz at full color depth |
Analogue (VGA) and Digital Video (DVI) inputs |
Electronics remote to microdisplay at lengths of 5m or 10 m |
Different display addressing sequences available for diverse applications |
Optional customization service for special requirements |
RS232 / USB interface for system control |
With R5 Interface
Interfaces | DVI / USB 2.0 / RS-232 |
---|---|
Synchronization Outputs | LED Current Drive / LED Enables / V-Sync |
Power | +12VDC / 5.4W (including Microdisplay & LED drive) |
Weight | 69g (Driver Board & Microdisplay) |
Digitally controlled color and greyscale | |
Compact, plug-and-play, all digital interface | |
Customizable color gamut | |
Fast switching liquid crystal (typical 40 μs) | |
No sub pixels or color filters | |
Different display addressing sequences available for diverse applications, customization service available | |
24-bit color system | |
Gamma correction / dither algorithm | |
Digital video input (DVI) | |
PC-based GUI & communications protocol for system integration & control |
With R12 Interface
Maximum Refresh Rate | 3.2 kHz Binary / 240-360 Hz 8-bit Greyscale |
---|---|
Interfaces | USB 2.0 / RS-232 / RS-485 |
Synchronization | Isolated Input Triggers, Programmable Isolated Output, Sync Isolated Illumination Sync, Inter-unit Sync (Daisy Chain) |
Power | +12VDC / 3.3W |
Weight | 32g (Driver Board & Microdisplay) |
Powerful GUI and API | |
Reduced design-in time with optional LED driver | |
Small form factor | |
Fast switching liquid crystal (typical 40 μs) | |
Flexible synchronization (including inter-unit synchronization) | |
Non-volatile storage for 768 bit-planes and associated sequences | |
One system can perform multiple measurements | |
Optional 4.7 A LED driver board | |
Direct drive with optional 50 mm flex extender | |
Variable display addressing sequences |
Compatible Products + Accessories
R3 Interface
The WXGA-R3 system is a fast switching, all-digital, high-performance reflective microdisplay and interface electronics with an optional extended length drive cable. Using no color sub-pixels, the proprietary Time Domain Imaging technology provides full-color high-resolution images from one all-digital microdisplay. The increased refresh rate enhances the performance of the microdisplay in both display and spatial light modulating applications. This is a simple and instant plug-and-play unit that supports remote connection of either one microdisplay driven from one interface board (single channel system) or two microdisplays driven from one interface board plus daughter-board (dual channel system).
R5 Interface
The WXGA-R5 system is a fast-switching, all-digital, high-performance reflective microdisplay and interface electronics. The 120 Hz imaging system is highly reliable with 5:3 format. The compact, direct drive interface is suitable for all high-performance monocular, biocular, and binocular imaging applications. Using no color sub-pixels, the proprietary Time Domain Imaging technology provides full-color high-resolution images from one all-digital microdisplay.
R12 Interface
The R12 is a fast-switching, all-digital, high-performance reflective SLM and application specific interface with optional 4.7 A LED driver. The SLM offers digitally precise images in a high fill factor FLCoS package ideally suited for off-axis projector applications in 3D metrology market. The interface allows the system builder to precisely time their images on the device under test and ensure accurate synchronization with other system components. With storage for 768 full resolution 1-bit images, the interface allows offline setup for online optimization with no controlling PC required.
RGB LED Illuminator (LUM-2LC-F3A)
High Power Single Channel LED Driver (M137)
50mm Flex Extender (M131)
YOU MIGHT ALSO BE INTERESTED IN
Other Microdisplay Products
Kopin Brings Clarity to Any Challenge
Our engineers are ready to create custom solutions for your needs.
Let’s Talk